Home DIY Project: 5 Steps to Install & Fit in Roller Blinds

Roller BlindsInstalling roller blinds on your windows is one of the best ways to give any room a quick makeover and privacy it needs. Along with that, these are the easiest to install. All you need is a set of roller blinds that will perfectly fit into your windows and the following steps are as easy as 1, 2, 3.

Here are some reminders to make the installation faster and easier:

1. Get the right measurements. Whether it is your door or windows, it is important to get a blind measurement of it. Start off with the windows’ cavity down to the span of area you’d like to cover. Once done, it is easier to decide whether you’d like to hang it or set it up over the top. When you’re hanging it, there should be a 30mm gap on each side to avoid overlapping your blinds.

2. Find the perfect spot. There are varieties of ways to install your window furnishings. This, however, depends on the available space on the surface. If there’s a wall on the sides, you may either may attach the mounting bracket on the window frame or hang it on the wall. If the surface is too open with no supporting on the side, you may affix it on the ceiling. Regardless, be sure you’ve carefully planned it first to avoid drilling at the wrong places.

3. Look for obstacles. Check for any possible hurdles that may affect the smooth movement of your blinds as you raise them and lower them down. Decide on which direction they roll and unroll, is it from the front or from the back. Be sure that whatever is the result it’ll provide a smooth and unobstructed sliding flow as you let them down.

READ  Home Electrical Wiring: 7 Safety Installation Hacks

4. Select the right kind. You’ll see many roller blinds varying in style, size and design. Each of which serves a certain purpose. Whether you want to completely block off the light or enhance the privacy in a room, Yes Blinds says blinds roller blackout is increasingly becoming the popular choice. This is probably because of the sleek and closed off design it has. Nonetheless, it is important to know your options and set out your purpose to make the search easier.

5. Hanging and fitting the rollers. Drilling to the frame or walls is probably the hardest in the course. As you fasten the bracket, be extra careful on the falling dust and concrete because it might go into your eyes. Wear gloves and goggles, as well as cover your nose to protect your eyes, nose, and hands. For the finishing touches, you may now place the rollers onto the bracket and enjoy your new window treatment.

Installing your own blinds is simple as long as you know the basics. You just need to pay attention to details and be more cautious to avoid committing mistakes. In cases, you can’t really handle it due to lack of time or fear of miscalculations, you may always ask for help.